The 416B is engineered to be 20% more fuel efficient that the older CAT backhoes. This is achieved with an engine that is more powerful at 74 horsepower. This serves the machine very well in coordination with an improved hydraulic system. With these, it outclasses other models like the Perkins 4.236. The CAT 416B also runs faster by 8% than the old models which can increase work productivity by 5%.

Like any other caterpillar backhoes, the 416B features easy controls for the operator. This ensures less stress and fatigue which ultimately adds to safety during operation. It also boasts of the ROPS or Rollover Protective Structure common to CAT backhoes and it also meets the international standards for protection against falling objects. The stabilizer spreads to 10’8 during operation to guarantee steadiness while working.

Other notable features of the Caterpillar 416B Backhoe:

• dig depth ranges from 14’6” to 18’2”
• Loading height = 11’5” to 13’10”
• Bucket digging force= 11,693 lbs. to 12,057 lbs
• Stick digging force= 7704 lbs to 5631 lbs
• Overall transport height= 11’3”
• Bucket capacities range from standard to heady duty or 2.5 cubic feet to 11.5 cubic feet.
• Heaped capacity= 1 cubic yard
• Lift capacity at full height= 4993 to 5250 lbs
• Breakout force= 8350 to 9300 lbs

The 416B offers a lot in terms of value for your money since it will perform tasks like loading dump trucks, moving materials, moving lumber, and any related work loads like excavations and trenching.

The hydraulic system of the Caterpillar 416B Backhoe is a closed center system which ensures appropriate amount of force at any speed of the engine during real time operations.

The transmission of the 416B depends on a 4 speed forward a reverse shuttle. It also has a neutral start position to prevent starting the machine while the 416B is on gear. This adds to the safety features that CAT backhoes are known for.

The service brakes of the 416B are two fully enclosed disc brakes controlled hydraulically. The parking brakes are controlled manually using a lever.

The hydraulic system of the 555E utilizes flexible tubing which replaced the steel tubing used in older backhoe series. A mechanical lock also replaced the hydraulic boom lock. There are also improvements implemented with the loader valve. These enhancements with the New Holland 555E backhoe ensures that it will operate on peak levels most of the time.

The 555E utilizes a straight arm loader like other machines in its class. A four bar linkage design like in the LB75, 575E, 655E, and 675E is used to optimize the bucket rotation and breakout force of the machine. This is also aided by a torque tube and massive integral loader on top of the loader post.

The cab is also ergonomically designed to make sure that the operator will be comfortable during operation, encountering lesser stress and fatigue. From the cab, the operator has a clear view of all the tools that he is manipulating and the surface that he is dealing with.

The 555E was also designed to make servicing very easy. The fuel and hydraulic fills are at ground level to facilitate easy access and quick servicing.

The New Holland backhoes including the 555E are engineered to last for decades and are designed to have tough, weather resistant surface finish. This is accomplished by employing state of the art paint processes.

Other significant features are:

• Dig depth = 14’5” to 18’5”
• Loading Reach = 5’1” to 8’2”
• Loading Height= 12’ to 14’6”
• Bucket Rotation = 160 to 180 degrees
• Service brakes use multi disc wet brakes while parking brakes use disc on transmission output shaft
• Open Center Hydraulic system
• Hydrostatic steering
• Power reversing with torque converter steering
• Can travel forward at 3.7mph to 20mph and on reverse 4.4mph to 25 mph
• Bucket capacity of 1.3 to 1.5 cubic yards
• Bucket Dig Forces ranges from 10,150 lbs to 11,610 lbs
• Dipper dig forces ranges from 8,070 lbs to 5,620 lbs.

This is primarily delivered due to powerful engines working with a very effective hydraulics system. In the New Holland LB75 Backhoe, an Iveco 8045.05 engine gives it a gross horsepower of 75 at 2300 RPM.

The body of this power machine is one-piece of massive mainframe which ensures strength and durability. The solid body also prevents vibration and decreases the noise during operation. Like the other New Holland construction machines the LB75features a cab where the operator can control the machine comfortably with easy to rich joysticks, readable gauges, and ergonomically designed seat.

This backhoe also boast of the E Series grease seals which allows intervals of 50 hour lubrication compared to the other machines in the market which is only optimal at 10 hours. The hydraulic system of the LB75 also allows the option of using a variety of attachments to meet the demands of any projects.

The LB75 has a straight arm loader which has a superior bucket rotation and a mean bucket force rotation. This can be attributed to the four bar linkage and dual system incorporated in the design of the loader.

Some notable features of the LB75 are:

• transport height of 13’1”
• Backhoe dig depth = 14’4” to 18’4”
• Bucket Rotation = 160 degrees to 180 degrees
• backhoe buckets are available on heavy duty to extra heavy duty variants
• Heavy duty bucket capacity= 1.3 cubic yards with Breakout force of 12250 lbs.
• Bucket dig forces may vary from standard (10670 lbs) or extended (10699 lbs)

The service brake of the LB75 operates on oil bath, self equalizing discs which are 8” in diameter while the parking brake depends on hand lever controlled 10.5” disc. Both these features add to the safety of the machine during operation.

TL120

The engine of the TL120 outputs 52 horsepower manipulated through 2 speed travel. The bucket breakout force of this machine is 4821 lbs, traction force is 6634 lbs, and has a tipping load of 3549 lbs.

TL130

The feel of the drive of TL130 is slightly more powerful than the TL120 having 67 horsepower. The breakout force of this crawler skid steer loader is at 6728 lbs.

TL140

The operating weight capacity of TL140 is 2083 lbs. The bucket breakout force of this machine is 7403 lbs and its traction force is higher than the previous models at 11070 lbs.

TL150

Like the other models, the operator guides the TL150 using a low effort joystick control. It is more powerful than its 3 predecessors with a 97 horsepower engine, 8692 lbs breakout force, and 13770 lbs traction force.

TL220

This is one of the 4 new machines joining the family of Takeuchi crawler skid steer loaders. The power of the engine is entry level at 54 horsepower but some safety features have been improved, operator cabin enhanced, and addition of an optional universal quick hitch mounting of attachments.

TL230

The TL230 has an operating weight of 8275 lbs with a 70 horsepower engine under its hood. The bucket breakout force is at 6728 lbs, traction force at 9106 lbs, and tipping load at 4630 lbs.

TL240

The engine is a slightly more powerful than its first generation counterpart at 86 horsepower. The breakout force is 7403 lbs and traction force is 11070 lbs.

TL250

Aside from having a 98 horsepower engine, the TL250 incorporates tough body design, good hydraulics, and operator safety to make it one of the top Takeuchi track loaders.

Published by Pro Vehicles

The B95 ensures that you will get the job done whether it involves digging, trenching, loading, or pushing. Its engine outputs a net 89 horsepower at 2200 rated rpm.

The innovative curved boom design of the B series allows for a low height transport, and increased digging power, here are the specs:

• Max digging depth = 14’
• Reach from Swing Center = 18’2”
• Truck loading height = 12’2”
• Digging Force Crowd= 9,217 lbs.
• Bucket Power Dig= 12,808 lbs.
• Boom Lift Capacity at ground level= 3,310 lbs.
• Loader SAE Heaped Capacity= 1.1 cubic yard
• Loader Breakout force= 15,057 lbs
• Loader Dump Clearance= 8’11”
• The Transport Dimension = 13’1” x 23’3” x 7’5”

Aside from its raw power the New Holland B95 backhoe also has a narrow boom which adds to excellent operator visibility lessening stress and fatigue.

The B series is designed for effortless control. The cab offers plenty of legroom even when the operator turns the seat. The cab is also accessible through doors on other side. The instruments are the latest easy to read gauges for quick assessment of engine speed and conditions.

The operator can switch easily from a 2WD to 4WD for easy management of difficult terrains. The gear selection is also displayed on the console box. With one push of a button, the operator can switch the power from the tractor to the loader to provide the power needed for heavy lifting, digging, or other tasks.

The engine is also designed for long life by using heavy duty valves and self adjusting poly V belt. The cooling system is engineered using the flow system design to ensure that the B95 is operating in optimal temperatures.

The simple design of the hydraulics also gives way to more power to all the attachments that work with the B95. The versatility of this power machine can be seen with quick changes of its loader, backhoe, auxiliary hydraulics, and hand tool attachments.

S70

The dimension of this very compact machine is 6’ high and 3’ wide. It can get you through the tight spaces and ensure that the job is done

S100

This loader can speed up to 6.5 mph and can deliver 1000 lbs of lift capacity. It weighs 4110 lbs. and operates on 35.5 horsepower engine.

S130

This machine is perfect for landscaping, excavating, fertilizing plants, or constructions. The S130 is just 60 inches wide and just needs around 6 feet to turn.

S150

The S150 is a good entry level skid steer loader since it is very compact but has hydraulic system decent enough to handle most of the Bobcat attachments.

S160

The S160 operates on a 59 hp engine which is slightly more than the S150’s. It has a breakout force and enough traction to do most of the excavation or handling of heavier loads.

S175

This entry level skid steer can lift loads up to a truck. It still maintains a compact design for high maneuverability.

S185

The operator has a great vision of his load and surrounding using this machine which has the advantages of a vertical lift path loader. It also incorporates monitoring which shuts down the machine when needed to prevent damage.

S205

This machine delivers the goods at 66 horsepower coupled with good reach. It has enough in its arsenal to do lifting, digging, or any job that you can think of.

S220

Even more powerful than the S205 at 75 horsepower, this machine is up to pushing, backfilling, hauling, or any other task.

S70 0

The S70 0 operates on 81 horsepower and is perfect for heavy lifting and operating high flow attachments.

S70 1

The S70 1 is enhanced in terms of power (85 hp), lifting capacity, cooling capacity, uptime protection, and attachment readiness.

Published by Pro Vehicles

• 96 net horsepower
• 15’10” up to 20’ digging depth
• 10,210 lb loader breakout force
• 1.25 cubic yard bucket capacity
• 18,500 lbs operating capacity

The cab of the G Series from John Deere is crafted to give the operator the most optimal view in all angles while working with the different attachment on different surfaces.

The 130G also uses the hydraulic system which allows quick and easy coupling of different tools to put more work within your grasp. It also has a curved knee which makes no hassle dumping of load to most trucks.

The 310 G has more traction with the front wheel drive power which allows working on marginal surfaces and it also provides help in heaping the bucket.

This power machine has extendable dipper stick which allows extra digging depth, reach, and ability. It also saves you a lot of money by having a gripper teeth work with the bucket to help grasp objects without having to purchase an extra thumb.

The controls of the 310G are engineered to make all motions controlled to the fullest by the operator making it a very efficient and safe workhorse.

This backhoe also allows a great amount of swing torque and lift to make craning tasks look so easy. The rearward stabilizers always make sure that heavy objects will be safely transferred from one point to another without any chance of flipping over.

The 310 G also operates on a wet type cylinder liner which spreads out heat appropriately to avoid oil breakdown and ring damage. The John Deere backhoes are also designed to self-lubricate the axles and bearings at any angle of operation. This saves you time and effort since you don’t need to lubricate them frequently.

The service brake and park brake also work on different systems to ensure safety. The wet disc brakes self adjusts while the park brakes are designed to hold even at steep angles.

The planetary drive of the 310G are designed to distribute loads over 3 gears and are protected by a bath of cooling oil to ensure long life.

The lull forklifts capabilities boost the confidence of the operator who can accurately and safely land loads on scaffolds or any spot of the construction site. The Lull machines are telehandlers which are also unique for their patented StabilTrak system. With StabilTrak, the forklift switches into a 4-point stance from a 3-point stance to increase stability.

Lull 664E-42 Telehandler

The 664E42 utilizes the patented system of StabiliTrak to deliver loads accurately. In addition it also utilizes the 80” horizontal placement system. It has rated capacity of 6000 lbs with a maximum reach of 35’6”. At maximum reach it can handle up to 1500 lb of load.

Lull 944E-42 Telehandler

The ability to couple with a wide range of attachments makes the 944E-42 ideal for most job sites. It is more powerful than the 664 E having a capacity of 9000 lb and 42’ lift height. The capacity of this telehandler in its maximum lift height is 6000 lbs. Its maximum reach is 35’6” where it can handle up to 2000 lb.

Lull 1044-54 Series II Telehandler

This Lull forklift Truck is the strongest and highest reaching of all in its class. It can meet the challenge of any work, be it steel erection, masonry, or general construction. The boom is engineered to allow coupling with a full range of tool attachments. The lift height of this tower of power is 42’ and has a maximum reach of 29 ft. Its force is coming from the John Deere 4045TF150 engine combined with excellent hydraulic system.

These forklift trucks will deliver the load to any spot you tell them to do. All it takes is a joystick, a long steady boom, “80 inch horizontal placement system, and good stabilization—these machines has it all.

Published by Pro Vehicles

Engine and Gears

A 4045T turbo charged engine powers the John Deere 310G to give a gross output of 79 horsepower. This engine was designed to help supply brute strength but was also fitted with custom made valves for precise operation. The 310G is also very economical in terms of fuel consumption at 1.1 to 1.9 gallons per hour.

It has a four-speed gear system which has a collar shift transmission and a hydraulic reverser. It can run from 3.6mph to 22 mph forward. The heavy duty final drives ensure that the shock loads are evenly distributed.

The operator will not have any difficulty turning the 310G since it has a hydrostatic power steering system that conforms to ISO standards.

The 310G will stop in your command using the power assisted hydraulic wet discs brakes which are self adjusting and self equalizing depending on the terrain conditions.

Hydraulics

The hydraulics has been innovated to make coupling with attachments quick and very easy. This innovative design is similar to what 310SG, 410G, and 710G have. The 310G can use attachments for Deere’s, JRB’s, as well as that of Caterpillar’s.

Some of the attachments that work with the 310G are pallet forks, heavy duty buckets, and multipurpose buckets. The attachments are optimally designed to give the operator a sense of the leveling or a clear perspective from the cab to safely navigate and operate them.

Other Specifications

Here are some other specifications which make the 310G fulfill what it is designed to accomplish:

• Digging Force of Bucket Cylinder = 11,106 lbs to 11,211 lbs
• Swing Arc = 180 degrees, Bucket Rotation =190 degrees, Leveling Angle=14 degrees
• backhoe bucket Capacity can range from 4.6 cubic feet to 10 cubic feet depending on the type of bucket used
• Backhoe Loader Lift Capacity = 3,685 lbs at maximum height of 13’11”
• Max Digging Depth= 17’11” with extended stick

MT Series

This caters to a lot of construction and building sector needs. The MT telescopic truck can lift a load of 2 to 4.5 tons to heights between 5 and 17m. The machines vary in power, reach, and maneuverability to meet the needs of different sectors. Several attachments can be used in tandem with the Maniscopic to be more productive.

MLT and MLA Series

This is the broadest among the range of the Maniscopics helping people with agricultural tasks. These machines can handle 2.5 to 4.5 tons of loads at 5 to 10 m height. The MLA line is considered the most advanced model in the market.

BT Series

These are compact Maniscopic machines designed to help with work in restricted spaces. They can handle loads of up to 2.5 tons.

MRT Series

These machines have a 3 in 1 function for materials handling, personnel lifting, and as a crane. Without any problem it can lift a load to a spot 14 to 30 m high. These Maniscopics are popular with structural works, constructions, and industrial maintenance.

Twisco Series

The twisco is a very compact machine that can be pulled by any construction site vehicle. It is very maneuverable in restricted places and can handle 1.5 to 2 tons of loads.

MVT Series

This is the power house of the group. The MVT series of machines are engineered to handle bulky and heavy loads. These Maniscopics gets its power from turbo engines.

MHT Series

They are designed to handle the extreme conditions of mining, quarrying, and waste management. They can handle 6 to 16 tons of load and able to transfer them at heights of 8 to 10 meters.

Published by Pro Vehicles