Lull telescopic forklifts are popular for meeting the demands of the construction job. They are easily controlled by the operator to accurately and safely deliver loads on elevated spots or any area of the construction site.
The Lull 644E-42 is one of the telehandlers that Lull boasts of. It gets its power from a Cummins B4.5 turbocharged, 4-cylinder diesel engine. It has a gross output of 99 horsepower and a torque rating of 276 cubic feet at 1500 rpm.
The transmission of the engine has an integral full gear-drive dropbox and can shift on 4 speed going forward and 3 on reverse. The rear axle of the Lull 644 E-42 utilizes the trademark Stabil-Trak of Lull which ensures that the machine will not slip on any angled slope while doing its job.
The Lull 644 E-42 telescopic forklift has a rated capacity of 6000 lbs. It is the small brother of the monster 944 E and 1044C. The 644 E-42 can lift to a maximum height of 42 feet without any problem. It can do this at very excellent cycle times of 12.5 seconds going up and 11.5 seconds going down. The unloaded boom stick can also be extended and retracted at 12.5 and 13.5 seconds respectively. The maximum forward reach of the machine is 35’ 6”.
The top speed of the 644 E-42 is 20 mph. Its loaded draw bar can pull 23470 lbs while keeping the frame level by as much as 12 degrees. Like other telehandlers from Lull, the 644 E-42 makes use of the patented horizontal placement system. This allows it to move the load 80” horizontally even at full height.
The 644 E-42 is engineered for precision work. The elevating arm is strategically assembled from the rear moving forward to deal with the load and elevated surfaces with no problem at all. This design gives the operators the level of control they need to be very efficient and productive.